# New Made In Japan VacuGlide Sleeve **URL:** \ **Category:** General\ **Created:** [September 23, 2026, 6:34pm UTC](https://forum.autoblow.com/t/new-made-in-japan-vacuglide-sleeve/423 "2026-09-23T18:34:57Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![Autoblow\_Brian\_Sloan](https://avatars.discourse-cdn.com/v4/letter/a/e274bd/32.png) [@Autoblow\_Brian\_Sloan](https://forum.autoblow.com/u/Autoblow_Brian_Sloan)\ **Post date:** [September 23, 2026, 6:34pm UTC](https://forum.autoblow.com/t/new-made-in-japan-vacuglide-sleeve/423/1 "2026-09-23T18:34:57Z")
Hey guys, I have been working with the same Japanese company who made our new Autoblow Ultra sleeve create a special VacuGlide sleeve from the same material used in the medical skin models to train surgeons on how to do stitches. I’m much closer on a final version now, and I made a video to explain it and show it to you guys. [Here is the video.](https://iframe.mediadelivery.net/play/293017/a6574a79-da84-409b-acd7-142133e4e340) ---
**Author:** ![Fixxelpo](https://avatars.discourse-cdn.com/v4/letter/f/85f322/32.png) [@Fixxelpo](https://forum.autoblow.com/u/Fixxelpo)\ **Post date:** [September 25, 2026, 5:46pm UTC](https://forum.autoblow.com/t/new-made-in-japan-vacuglide-sleeve/423/2 "2026-09-25T17:46:02Z")
Any release dates of these new project sleeves? or just still try-outs? Will these also have different textures? → Do you think about special front designs vacuglide? that would work, weight… Or designs in just 1 sleeve with special fronts, or impossible to mold/print. ![619AedmLpkL._AC_SL1500_1](https://canada1.discourse-cdn.com/flex035/uploads/autoblow/original/1X/8b129294da7967bbc9841cc6216d61f8e822fbb0.jpeg) ---
**Author:** ![BJB\_777](https://avatars.discourse-cdn.com/v4/letter/b/67e7ee/32.png) [@BJB\_777](https://forum.autoblow.com/u/BJB_777)\ **Post date:** [September 26, 2026, 5:45am UTC](https://forum.autoblow.com/t/new-made-in-japan-vacuglide-sleeve/423/3 "2026-09-26T05:45:20Z")
I use one of the more soft real skin feel sleeves I’ve made from a stroker I ordered online & yes it does expand and block the hole so my solution was I took a real small air line about ten inches insert in vaccuglide hose and up inside the receiver toward the cap & it works fine and as for your strap idea I have one better and no lie it’s allowed me to try all kinds of ideas and got it with another online order which was just trash but because of this one piece turned out to be my best purchase thus far other than the vac glide 1&2 of course but it’s a thick rubber o ring approximately as big around as the receiver flat on one side and rounded on the other it’s flexible and insures No leaks if interested in anything I’ve mentioned and have questions please feel free to reach out ---
**Author:** ![Autoblow\_Brian\_Sloan](https://avatars.discourse-cdn.com/v4/letter/a/e274bd/32.png) [@Autoblow\_Brian\_Sloan](https://forum.autoblow.com/u/Autoblow_Brian_Sloan)\ **Post date:** [September 26, 2026, 1:45pm UTC](https://forum.autoblow.com/t/new-made-in-japan-vacuglide-sleeve/423/4 "2026-09-26T13:45:35Z")
Not sure on the date yet. I’m actually talking to them about making these in a totally clear material as well, instead of in this yellow they’ve sent us samples in… I think this kind of vagina that fits over a this pump would also work instead of our seals. I probably would not make this kind of thing because it’s already easily available and inexpensive on Amazon and on various sites, but I should probably buy one and try it for myself. ---
**Author:** ![Fixxelpo](https://avatars.discourse-cdn.com/v4/letter/f/85f322/32.png) [@Fixxelpo](https://forum.autoblow.com/u/Fixxelpo)\ **Post date:** [September 26, 2026, 3:08pm UTC](https://forum.autoblow.com/t/new-made-in-japan-vacuglide-sleeve/423/5 "2026-09-26T15:08:59Z")
Yeah, but finding the right sizes for the VacuGlide and something durable has been tricky… Most of what you can find is just junk or breaks after a single use. No luck yet. You should really consider front sealings and textured sleeves like onahole and fleshlight kind of textured sleeves. That’s basically all that’s still missing from the design, along with keeping the weight under control so the vacuum function continues to work smoothly. And full positional control over exactly where the stroker is located on the Y-axis. Isn’t this something you could solve through a firmware update on the software side? Couldn’t this be calculated using AI based on which unit is being used—small, medium, or large and the timing of the air released or added? (but i’ve read that for version 3.0) Hopefully you’ll come up with a good design. ---
**Author:** ![Goth667](https://avatars.discourse-cdn.com/v4/letter/g/a9adbd/32.png) [@Goth667](https://forum.autoblow.com/u/Goth667)\ **Post date:** [September 29, 2026, 2:11pm UTC](https://forum.autoblow.com/t/new-made-in-japan-vacuglide-sleeve/423/6 "2026-09-29T14:11:51Z")
Brian have you tried to make a Vacuglide sleeve like this? 1. Make the entrance like the pump pussy that has the cylinder go into a U-shaped ring. 2. After opening the sleeve would start and go inside the receiver like any other sleeve and held in place with the cup on the receiver. 3. To actually fix the whole thing into place, you can run 4 bands from the outside of the pussy addon to the top and connect there in a ring. That ring would then be on top of the receiver cap. The whole thing would therefor be the pussy entrance with a cut in ring to set the receiver down in, and bands going up to the top of the cap, merging into a ring, holding the receiver in place. While the pussy entrance has the sleeve tube to be fixed under the cap. I hope I could paint you a picture of what I think would allow you to make some deluxe sleeve. ---
**Author:** ![Autoblow\_Brian\_Sloan](https://avatars.discourse-cdn.com/v4/letter/a/e274bd/32.png) [@Autoblow\_Brian\_Sloan](https://forum.autoblow.com/u/Autoblow_Brian_Sloan)\ **Post date:** [September 29, 2026, 3:22pm UTC](https://forum.autoblow.com/t/new-made-in-japan-vacuglide-sleeve/423/7 "2026-09-29T15:22:12Z")
Okay, thanks for the tip on this.